價格：免費
更新日期：2014-04-26
檔案大小：2.5M
目前版本：2.1.4
版本需求：Android 2.2 以上版本
官方網站：http://www.inex.co.th
Email：tech@inex.co.th
聯絡地址：Innovative Experiment Co.,Ltd. 108, Sukhumvit 101/2, Sukhumvit Rd, Bangna, Bangkok 10260
Let's try to build your own android robot from IOIO or IOIO-Q board
This is ioio robot project that we need to use IOIO or IOIO-Q board applied to robot which camera (Use two android devices)
first device connected with IOIO board for control robot and use for camera
second device used for control robot motion , receiver image from camera of the first device and order to open flash or take a picture via WiFi
** Use WiFi hotspot from android device which connected with IOIO or IOIO-Q board for faster image transfer **
** Image resolution 320 x 240 px and 20% - 40% image quality, recommend for fast transfer image **
Recommended device spec
• 1 GHz Single Core or more
• 512 MB of RAM (1 GB or more for better)
• Camera support (If no back camera application will use front camera instead of back camera)
The IOIO Camera Robot consists of
• IOIO or IOIO-Q board ,
• ZX-DCM2 or IOIO-Robotic Activity Board
• Li-Po Battery
• Two DC Motor
• Robot plate and wheel
• Two android device (Camera supported)
For IOIO-Q board, you can buy at http://goo.gl/iSFHP
For ZX-DCM2, you can buy at http://goo.gl/0a868
See more detail and download from www.tpemagazine.com on issue 39 (Thai language)
http://www.tpemagazine.com/2009/2009-03-17-09-47-37/149-issue-39/785-ioio-camerabot-.html
Download source code from
https://github.com/akexorcist/IOIO-CameraRobot/